Eyenut Identification Chart

Part Number
Size
Thread Pitch
Description
D700X
M16
2.0mm
ROUND EYE NUT - ANGLED BASE WITH TAPERED WASHER AND BOLT FOR DISHED DISCS
D700Y
N/A
N/A
ROUND WELD ON - FLAT BASE
D700Z
N/A
N/A
ROUND WELD ON - ANGLED BASE FOR DISHED DISCS
D7001
N/A
N/A
HEXAGON WELD ON - FLAT BASE
D7001A
3/4"
UNC
HEXAGON EYE NUT - FLAT BASE
D7001B
5/8"
UNF
HEXAGON EYE NUT         "
D7001C
5/8"
UNC
HEXAGON EYE NUT          "
D7001D
M14
1.5mm
HEXAGON EYE NUT        "
D7001E
M16
1.5mm
HEXAGON EYE NUT         "
D7001F
M18
1.5mm
HEXAGON EYE NUT          "
D7001G
M2
2.5mm
HEXAGON EYE NUT         "
D7001H
M16
2.0mm
HEXAGON EYE NUT        "
D7001J
3/4"
UNF
HEXAGON EYE NUT         "
D7001K
M18
2.5mm
HEXAGON EYE NUT         "
D7001L
M22
1.5mm
HEXAGON EYE NUT         "
D7001M
9/16"
UNF
HEXAGON EYE NUT         "
D7001N
M20
1.5mm
HEXAGON EYE NUT         "
D7001P
M18
2.0mm
HEXAGON EYE NUT          "
D7001-B
M22
2.5mm
HEXAGON EYE BOLT - JOHN DEERE

Note: Most threaded eyenuts are available with hex.head bolts as extras.



 

A design enabling two wheels of different diameters to be dualled together when the two tyres have a similar loaded radius. For example, a 13.6 R 48 dual tyre alongside a 20.8 R 38 tractor tyre will usually keep the overall vehicle width under 3.0m, or a 20.8 R 42 dual tyre alongside a 710/70 R 38 tractor tyre offers less expensive dualling than using two 710 tyres. Numerous combinations can be dualled in this way, listed here are only a few examples, other sizes are available.
 

Dual Wheel
Tyre & Rim Size
Tractor Wheel
Tyre & Rim Size
Clamps
per pair
16.9 - 30 on 15 x 30
600/65 - 28 on 18 x 28
8
Price on request
13.6 - 38 on 12 x 38
16.9 - 34 on 15 x 34
4
Price on request
11.2 - 46 on 10 x 46
16.9 - 38 on 15 x 38
8
Price on request
12.4 - 46 on 10 x 46
18.4 - 38 on 15 x 38
8
Price on request
9.5 - 48 on 8 x 48
16.9 - 38 on 15 x 38
8
Price on request
11.2 - 48 on 10 x 48
18.4 - 38 on 15 x 38
8
Price on request
13.6 - 48 on 12 x 48
20.8 - 38 on 18 x 38
12
Price on request
20.8 - 42 on 18 x 42
710/70 - 38 on 23 x 38
12
Price on request
520/85 - 46 on 16 x 46
710/70 - 42 on 23 x 42
12
Price on request
       

Please contact our sales team for advice and pricing for stepped duals.


An adaptor to allow our standard Box Rim row crop wheels to be used as a single row crop or as a dual wheel alongside another rowcrop or standard tractor wheel. With the bolt in spacer bands removed, the row crop wheel reverts back to single use.


Designed to fit some original tractor wheels of a rim and flange design, the bolt in power rails connect these wheels in exactly the same way as above. (supplied with spacer bands)


Extra wide spacer bands can be specified to allow the use of dual wheels for inter-row work. These are custom built to the required row spacing and can be either standard tractor sizes or rowcrop sizes. Note: The centre discs of the tractor wheels may need to be reinforced to withstand the additional loading due to the extra width and consequent leverage. This is more relevant when using rowcrop wheels due to the larger diameter discs (more leverage) and higher tyre pressures (harder ride).


All our standard Stocks Duals can also be used as triple wheels. Simply use the same size again, coupled onto the tractor wheel using clamp assemblies with extra long hooks. Some tractors are better suited than others for triple installations, for example, those using bar type axles.
Please contact our sales team for advice and pricing for any of the above.

 

 Contact us now for information
 Go to top