Showing 1–16 of 45 results

Fan Jet Pro Applicator

The Pro is the most popular Fan Jet and is suitable to fit to, and use with all machines including ATV’s, UTV’s, tractors, self-propelled and trailed sprayers, and cultivation machinery – in fact, any vehicle, or even boats, with a 12-volt power source and is most commonly used for slug pelleting.

DOWNLOADS

▾ BROCHURE ▾ OPERATORS GUIDE

Fan Jet Twin Applicator

The Twin is designed to spread a large, dense slug pellet typically from 20m up to a maximum of 30 metres. It is suitable to t to any vehicle developing 40 amps, making it ideal to use with most UTV’s (utility vehicles) and is typically front mounted to tractors, and self-propelled sprayers but maybe rear mounted.

DOWNLOADS

▾ BROCHURE ▾ OPERATORS GUIDE ▾ QUICK START GUIDE

Fan Jet Mini Applicator

The Mini is designed for the restricted spreading of slug pellets from approximately 2 – 10 metres, typically mounted to the back of a cultivator immediately prior to seed drilling, or to the back of a seed drill or cultivator-seeder whilst seeding, or a set of rolls after seeding.

DOWNLOADS

▾ BROCHURE ▾ OPERATORS GUIDE ▾ QUICK START GUIDE

Fan Jet Std & Vario

    The Standard Control console is a simple disc on/off switch and a on/off shutter switch. This model can be connected to a sprayer master switch, to automatically start and stop as the sprayer turned on and off.  The Vario Disc Speed Control console enables the operator to control disc speed to reduce the overall spreading width – ideal to use as headland control with slug pellets, or when broadcasting small seeds using an implement, for example when incorporating a cover crop of clover or stubble turnips using a stubble cultivator or grass seed using a tined grass harrow. Use with the integral width deflectors or optional seed deflector, and simply dial down the disc speed as required to match the bout width.

    DOWNLOADS

    Fan Jet Duo VS-2

    The Fan Jet Duo VS-2 Control console can be used either as a lower cost manual rate adjustment, non speed proportionate control, with a an optional speed input, it will provide economic automatic speed .proportionate rate application in line with forward speed. The console has independent Left Hand and Right Hand feed control with instant start and stop of spreading, and variable disc speed with monitoring and alarms.

    DOWNLOADS

    Fan Jet Pro Plus Applicator

    This model has all the features of the standard Fan Jet Pro in terms of spreading performance, headland control, and cost options (except variable disc speed is standard) The difference is that this model uses a rotary feed mechanism instead of gravity feed onto the disc. Fluted feed rolls are driven by a reliable electric motor, and the choice of feed roll and speed of rotation determines the application rate.

    DOWNLOADS

    ▾ BROCHURE ▾ OPERATORS GUIDE ▾ QUICK START GUIDE

    Fan Jet Duo Applicator

    The Duo is designed to spread a large, dense slug pellet typically from 24m up to a maximum of 36 metres, and is designed primarily for front mounted attachment to large self propelled crop sprayers and front linkages of tractors – due to it’s size, weight (215 – 315kgs), height and power requirements(60 amps) it is not suitable for ATV’s or utility vehicles.

    DOWNLOADS

    ▾ BROCHURE ▾ OPERATORS GUIDE ▾ QUICK START GUIDE

    Fan Jet Mini

    Standard control provides variable disc and feed motor speed, with instant start and stop of spreading, and on-the-move manual rate change.

    DOWNLOADS

    Fan Jet UTV Mount

    Specifically designed and built by Stocks AG to compliment the Fan Jet range of machines. Utilising the full width of the Utility Vehicle to achieve optimum spread pattern and width. Comes complete with a junction box mounting plate, forklift brackets and fully assembled. Supplied as a “Single Carrier” chassis for the use of a Fan Jet Pro or Plus. For the Twin and Duo machines, an “Additional Carrier” is required. When ordered in conjunction with any Fan Jet, is fully assembled and ready to go to work.

    DOWNLOADS

    ▾ BROCHURE

    VS-2

    This can be used either as a low-cost non-speed proportionate control similar to the Vari-Speed Control, or with a suitable speed input, will give economic speed proportionate output. Currently, it is available for Turbo Jet.  In either format it shares the same simple calibration procedure as the Vari-Speed, and with a ground speed input from either a supplied GPS receiver, or using a mechanical or radar speed signal from the tractor ISOplug, it will match the speed of the feed motor to the forward speed, to maintain the selected application rate. Economic and easy to use, with simple audio / visual alarms to alert the operator of any malfunction or low hopper contents.

    DOWNLOADS

    ▾ OPERATORS GUIDE

    Grass Seed Deflector

    This easily attached, adjustable, all steel deflector gives a more accurate and controlled placement of grass seed when re-seeding or overseeding pasture with a tined grass harrow.  It provides adjustment width and depth of spread, and will deflect seed down into the tines of the harrow – especially useful in windy conditions.  It is suitable for use with harrows from 3 metres to 6 metres wide, and supplied with a grass agitator as standard.

    DOWNLOADS

    Vari-Speed

    This is a simple low-cost control, with manual ON/OFF and a dial to set the application rate. It is not linked to forward speed so once calibrated a consistent forward speed must be maintained, or the rate can be manually increased or decreased on the move using the dial.

    DOWNLOADS

    ATV Fitting Kit

    Recommend only for the Pro 65 the ATV fitting kit enables quick and easy fitting to the majority of ATV’s on the market today.

    DOWNLOADS

    i-CON

    This is an extremely comprehensive GPS based colour touchscreen automatic control system with numerous features. It is capable of Precision Farming automated variable rate application, working from a seeding plan – simply load the pre-defined seeding plans via the SD card. The RDS i-CON system automatically maintains a preset application rate as forward speed varies, with on-the-go manual up and down adjustment of the rate from the target. The i-CON monitors forward speed by GPS and controls the feed roll speed as required. Constant comparison and balancing of forward speed versus feed motor speed ensure an extremely accurate and reliable seeding rate is maintained.

    DOWNLOADS

    ▾ OPERATORS GUIDE

    Artemis Ready

    This allows our rotary feed machines to be controlled using the Artemis screen fitted to many OEM drills including Weaving, Dale, Claydon and Mzuri.

    DOWNLOADS

    ▾ OPERATORS GUIDE ▾ QUICK START GUIDE

    Front Mount Beam

      Front Mounting Beam for mounting to many self propelled sprayers and tractor front linkages.  A specifically designed hydraulic raise and lower option can be specified to allow easy safe filling and calibration suitable for John Deere sprayers.

      DOWNLOADS