From our vast stock of rims and centres, we can build a wheel quickly and cost effectively and non-standard specifications can usually be catered for.

Stocks AG
Stocks AG

Our Special Applications Products

Compact Tractor Wheels

    We offer wheels to convert compact tractors for use in the amenity, agricultural or industrial sectors. These wheels are generally fixed centre and can be supplied as bare wheels or ready fitted with tyres of turf, agricultural or industrial patterns of your choice.

    DOWNLOADS

    ▾ BROCHURE

    Loader Wheels

      We offer wheels to fit loaders of all types used in agricultural, construction and forestry applications. These are fixed centre wheels, typically with15-25mm thick centre discs, and are built to cope with extreme loads that large loaders and shovels can exert with large grabs, buckets and rakes. These wheels are available with reinforced rim edges (often specified for forestry or silage clamp use) to just the outside edge, or both inner and outer rim edges and a variety of valve guards.

      DOWNLOADS

      ▾ BROCHURE

      Wide Wheels

        We offer wheels of any width to take wide tyres. Traditionally used for flotation tyre and top work such as drilling, rolling and fertiliser spreading, but now with tyre technology improving rapidly, wide section tyres are becoming far more commonplace for all aspects of primary cultivation and planting, on very high horsepower tractors, and the wheels need to be strong enough to cope with the power and torque. Very wide wheels normally have fixed centres, but if they are required to fit different tractors, consider a bolt-in hub adaptor for more versatility. For agricultural tyres the rim is normally a one-piece rim – however, some tyres require a 3 or 5 piece lock ring rim to mount the tyre – we can produce this design also.

        DOWNLOADS

        ▾ BROCHURE

        Spacers

          Wheel and axle spacers can be manufactured for specific track settings or to straddle beds or for controlled traffic farming. Discs can be modified to give increased or decreased track settings from standard, and it is recommended that we reinforce them to cope with the extra stress of extreme track settings.

          DOWNLOADS

          ▾ BROCHURE

          Bolt in hub

            Usually applicable to fixed centre wheels – If the same wheel is to be used on different tractors with different hubs (8/10/12 stud) – we offer bolt-in hub adaptors to allow wheels to be utilised better on many different vehicles. It is also possible to have bolt-in adaptors to adjust the track setting from one tractor to another when the axles are different lengths. Many options are available.

            DOWNLOADS

            ▾ BROCHURE

            Reinforced Rims and Centre Discs

              Rim edges can be reinforced with continuously double welded solid steel bar for forestry or silage lampwork. Valve guards of different designs can be specified. Centre discs of all types can be reinforced around the hub area if required.

              DOWNLOADS

              ▾ BROCHURE