00:00 Intro
00:22 Home Screen Layout
01:08 Manually Change Application Rate
01:30 i-CON Buttons Explained
01:59 Updating Volume In Hopper
02:20 Main Settings Screen
03:01 Cal Factor
03:26 Set Machine Working Width
03:54 Pre Start
04:42 Turning Agitator On/Off
05:15 Alarms Page
06:04 GPS Diagnostics
06:15 Factory Settings
06:30 Simulated Speed
07:21 Calibration
09:04 Starting The Seeder

00:00 Intro
00:17 Control Box Buttons & Navigation
00:42 Screen Layout
01:05 Set-up
01:20 Implement Working Width
01:57 Simulated Speed
02:18 Metering Unit Settings
03:23 Calibration
06:12 Start The Applicator

00:00 Intro
01:03 Module Offline
01:28 Set-up
01:41 Factory Settings
01:49 Channel Set-up
01:53 Select Working Width
01:05 Metering Set-up
02:44 Channels
03:05 Applicator Module (APM) Set-up
03:34 TL Module Set-up
05:12 Set Application Rate
05:20 Cal Factor
05:24 Calibration
06:36 Nudge Rate Up/Down
06:48 Simulated Speed
07:28 Alarms Page

00:00 Intro
01:06 Main Screen Display
01:58 Basic Settings
02:44 Set Application Rate
03:22 Calibration Set-up
04:21 Machine Set-up
04:28 Change Spread Width
06:20 Speed Source
07:27 Front/Rear Off-set
07:53 CANBus Setting
08:32 Calibration
10:18 Start Working/Turn Machine On
10:48 GPS Map
11:24 Alarm Settings
11:49 Jobs Page