Our Controls Products

    Fan Jet Std & Vario

      The Standard Control console is a simple disc on/off switch and a on/off shutter switch. This model can be connected to a sprayer master switch, to automatically start and stop as the sprayer turned on and off.  The Vario Disc Speed Control console enables the operator to control disc speed to reduce the overall spreading width – ideal to use as headland control with slug pellets, or when broadcasting small seeds using an implement, for example when incorporating a cover crop of clover or stubble turnips using a stubble cultivator or grass seed using a tined grass harrow. Use with the integral width deflectors or optional seed deflector, and simply dial down the disc speed as required to match the bout width.

      DOWNLOADS

      Fan Jet Duo VS-2

      The Fan Jet Duo VS-2 Control console can be used either as a lower cost manual rate adjustment, non speed proportionate control, with a an optional speed input, it will provide economic automatic speed .proportionate rate application in line with forward speed. The console has independent Left Hand and Right Hand feed control with instant start and stop of spreading, and variable disc speed with monitoring and alarms.

      DOWNLOADS

      Fan Jet Mini

      Standard control provides variable disc and feed motor speed, with instant start and stop of spreading, and on-the-move manual rate change.

      DOWNLOADS

      VS-2

      This can be used either as a low-cost non-speed proportionate control similar to the Vari-Speed Control, or with a suitable speed input, will give economic speed proportionate output. Currently, it is available for Turbo Jet.  In either format it shares the same simple calibration procedure as the Vari-Speed, and with a ground speed input from either a supplied GPS receiver, or using a mechanical or radar speed signal from the tractor ISOplug, it will match the speed of the feed motor to the forward speed, to maintain the selected application rate. Economic and easy to use, with simple audio / visual alarms to alert the operator of any malfunction or low hopper contents.

      DOWNLOADS

      ▾ OPERATORS GUIDE

      Vari-Speed

      This is a simple low-cost control, with manual ON/OFF and a dial to set the application rate. It is not linked to forward speed so once calibrated a consistent forward speed must be maintained, or the rate can be manually increased or decreased on the move using the dial.

      DOWNLOADS

      i-CON

      This is an extremely comprehensive GPS based colour touchscreen automatic control system with numerous features. It is capable of Precision Farming automated variable rate application, working from a seeding plan – simply load the pre-defined seeding plans via the SD card. The RDS i-CON system automatically maintains a preset application rate as forward speed varies, with on-the-go manual up and down adjustment of the rate from the target. The i-CON monitors forward speed by GPS and controls the feed roll speed as required. Constant comparison and balancing of forward speed versus feed motor speed ensure an extremely accurate and reliable seeding rate is maintained.

      DOWNLOADS

      ▾ OPERATORS GUIDE

      Artemis Ready

      This allows our rotary feed machines to be controlled using the Artemis screen fitted to many OEM drills including Weaving, Dale, Claydon and Mzuri.

      DOWNLOADS

      ▾ OPERATORS GUIDE ▾ QUICK START GUIDE

      ISO BUS

      This allows all our rotary feed machines to be controlled using the tractors own in-cab ISOBUS terminal, or if the parent implement uses RDS ISOCAN or ISOCAN ARTEMIS controls and has spare channels, it may be utilised to control the Stocks.  Isobus compatibility may be brand dependent – please enquire.

      DOWNLOADS

      Wizard Control System

      No longer used – 2012 – 2015 Production

      See below for manuals

      DOWNLOADS

      ▾ OPERATORS GUIDE ▾ CALIBRATION GUIDE